這款 28x26mm 的代用錶帶,是針對 RXW 及 有些錶款的錶耳是固定的,
錶帶無法拆裝的情況所設計使用.
當然如果把錶帶直接手工縫製在手錶上,就不必使用這兩個小螺絲釦了!
在最下面的那張沒有小釦子的錶帶照片,就是錶帶直接縫製在手錶上面的照片.
下面這款黑色小牛皮代用錶帶,是採用兩片柔軟的小牛皮,
以手工削薄之後,上下兩片貼合在一起, 再用上過臘的麻線,
以手工縫製完成. 規格尺寸ˋ皮革及麻線的顏色,都可以特別訂做.
錶帶使用兩個小螺絲釦,在把錶帶搭配裝置在手錶上之後,
把小螺絲釦安裝在錶帶上, 使用一般的起子, 就可以隨時自己更換錶帶了.
在下圖中, 就是使用小螺絲扣的 RXW 28/26mm 代用錶帶.
圖中短的是錶帶的正面,長的帶子是錶帶的反面.
下面這款 28/26mm chocolate brown calf strap, 適用於錶耳是28mm,
錶帶扣是 26mm的規格.
這款代用錶帶也可以訂做 26/24mm 的規格,可以使用24mm的錶帶扣.
由於是手工" 量錶訂製", 顏色ˋ尺寸ˋ厚度都可依照個人喜好來製作.
下圖就是直接把錶帶縫製在手錶上的照片.
僅此登出與巴友分享! 有關細節 歡迎 pm 詢問
_________________
George Lan
george3616013 在 星期五 2008-09-19 19:32 作了第 4 次修改
發表人 | 內容 | ||
---|---|---|---|
george3616013
資深會員 |
|||
keeekeee
進階會員 |
|||
george3616013
資深會員 |
Hi ! This strap was designed for some watchs that its lugs were fixed .
Since that whenever want to change the straps the wearing strap have to cut off . If won't to cut off the wearing strap there is a proper method by cutting it off from the buttons. We provide the buttons and its tool for free as a special bonus. _________________ George Lan |
||
george3616013
資深會員 |
Hi ! This strap was designed for some watchs that its lugs were fixed . Since that whenever want to change the straps the wearing strap have to cut off . If won't to cut off the wearing strap there is a proper method by cutting it off from the buttons. We provide the buttons and its tool for free as a special bonus. There are a kind of screw button instead of the buttons [兩個釦子] that the straps can change easily! _________________ George Lan |
||
george3616013
資深會員 |
感謝 keeekeee大 提問, 關於如何重新更換錶帶的問題, 我們另外還有提供小螺絲扣[screw buttons]的使用方法. 前兩張分別是黑色和咖啡色28/26mm RXW 代用錶帶, 使用小螺絲扣來固定.用一般的起子就可以隨時更換錶帶了. 第三張照片可以看到錶帶背面的小螺絲扣. _________________ George Lan |
||
第1頁(共1頁)
您 無法 在這個版面發表文章
您 無法 在這個版面回覆文章
您 無法 在這個版面編輯文章
您 無法 在這個版面刪除文章
您 無法 在這個版面進行投票
您 無法 在這個版面上傳附加圖檔
您 可以 在這個版面下載已上傳之附加圖檔
您 無法 在這個版面回覆文章
您 無法 在這個版面編輯文章
您 無法 在這個版面刪除文章
您 無法 在這個版面進行投票
您 無法 在這個版面上傳附加圖檔
您 可以 在這個版面下載已上傳之附加圖檔