WatchBus 手錶討論區 :: 觀看文章 - how to set time in mechanical watch?
開新主題 回覆文章 Share
發表人 內容
dbssimon
資深會員
資深會員
發表 發表於: 星期三 2005-11-02 03:12
引言回覆

Some people said it is no good if turning the time across 0:00 a.m. It will demage the part inside. Is it true?

The watch wtih date display.

So what is the best way to set time?
dbssimon
資深會員
資深會員
發表 發表於: 星期三 2005-11-02 03:16
引言回覆

Sorry, what I wanna know is how to set time and date if the watch has stopped. Thank you.
MadMax
資深會員
資深會員
發表 發表於: 星期三 2005-11-02 03:23
引言回覆

You have misunderstood........

You can not adjust the day/date display between 9pm~4am, 'cause in that period of time, the watch is changing them so you should not interrupting it or you will damage the gear machinery, but you can tuning time any time you like.
dbssimon
資深會員
資深會員
發表 發表於: 星期三 2005-11-02 14:16
引言回覆

i see.

I have tried once, my god.

If the parts have been demaged, what is the result? I mean what I can observe ?

I do not observe any changes after that. Should I give it for checking?
calatravayang
榮譽版面管理員
榮譽版面管理員
發表 發表於: 星期三 2005-11-02 14:42
引言回覆

dbssimon 寫到:
i see.

I have tried once, my god.

If the parts have been demaged, what is the result? I mean what I can observe ?

I do not observe any changes after that. Should I give it for checking?


有可能會壞,但如果後來運作都正常,那至少是無大礙

我曾經拿我的Seiko石英錶做過實驗,在換日進行到一半的時候手動快調日期
當時可以很明顯的感覺到有一股阻力,我想確實是有打架到了
但接下來至今的上百次換日也是都運作正常


calatravayang 在 星期三 2005-11-02 14:57 作了第 2 次修改
MadMax
資深會員
資深會員
發表 發表於: 星期三 2005-11-02 14:47
引言回覆

calatravayang 寫到:
dbssimon 寫到:
i see.

I have tried once, my god.

If the parts have been demaged, what is the result? I mean what I can observe ?

I do not observe any changes after that. Should I give it for checking?


有可能會壞,但如果後來運作都正常,那至少是無大礙

我曾經拿我的Seiko石英錶做過實驗,在換日進行到一半的時候手動快調日期
當時可以很明顯的感覺到有一股阻力,我想應該是有受損了
但進行來至今的上百次換日也是都正常運作

我也幹過這種事 裝白ㄘ,後來好像也沒啥問題.........不過大家最好還是少玩這種危險遊戲 嘲笑
watchnut
資深會員
資深會員
發表 發表於: 星期三 2005-11-02 14:50
引言回覆

有沒有人拿較便宜的機械錶試過?
有點想知道結果會是怎麼樣? 哈 哈 哈
會不會就此不動如山?
dbssimon
資深會員
資深會員
發表 發表於: 星期三 2005-11-02 14:51
引言回覆

Thank you for MadMax, you reply very fast and accurate. Thank you.

Also, one more question, is it safe to tune the time by counter-clockwise?

Someone said that it is forbidden to set the time by counter-clockwise across 0:00 a.m., is it true? So how about other hours in a day?
dbssimon
資深會員
資深會員
發表 發表於: 星期三 2005-11-02 14:54
引言回覆

for me, my case is the date change seems finished, at least from the display. But maybe the parts inside have not separated yet.

And I fast tune the date, well, the watch seems okay, everything seems fine (from what I can see).
MadMax
資深會員
資深會員
發表 發表於: 星期三 2005-11-02 15:06
引言回覆

watchnut 寫到:
有沒有人拿較便宜的機械錶試過?
有點想知道結果會是怎麼樣? 哈 哈 哈
會不會就此不動如山?

我是拿7750試的 裝白ㄘ ,快調日期時,聽到卡卡聲,且日期震動卻不往前跳,就不敢再試了 裝白ㄘ
dbssimon 寫到:
Thank you for MadMax, you reply very fast and accurate. Thank you.

Also, one more question, is it safe to tune the time by counter-clockwise?

You are welcome.

I'm not quite sure about this, but I had done this everytime when I was tuning my watch, it seems ok.

But in the date changing period, it is forbidden, that's for sure.
從之前的文章開始顯示:
1頁(共3頁)
前往:

無法 在這個版面發表文章
無法 在這個版面回覆文章
無法 在這個版面編輯文章
無法 在這個版面刪除文章
無法 在這個版面進行投票
無法 在這個版面上傳附加圖檔
可以 在這個版面下載已上傳之附加圖檔