[size=14] [/size]手上有支
MIDO OCEAN STAR dataday COMMONDER 透明錶背上有LC8269字眼
近期感覺擺輪轉動角度減小,載一整天晚上脫下放桌上只能再走4 到 5 小時左右.
想將機蕊拆卸DIY玩玩,但就是不知道拆卸錶冠的正確方法,怕胡亂挖拔會將龍心搞斷.
它是由錶鏡打開的結構.
請巴友指點. 先謝謝了!
發表人 | 內容 | ||
---|---|---|---|
watchsolo
新進會員 |
|||
0925
中級會員 |
|||
0925
中級會員 |
Sorry, the above website does not show you the details. The following is copied from Timezone Watch School:
With many watches, it is advisable to place the crown in the hand-setting position before removing the stem, as this will secure the keyless works parts in the movement plate. The stem is removed by loosening the set lever screw a few turns (without removing it), or, as the photo, by depressing a sprung set-lever button . Both types will be just to the centerline of the stem on the top plate. Either action lifts the set lever post clear of the stem. The button (above left ) on our movement is held in the depressed position with a small screw driver or shapened pegwood while the stem is gently withdrawn from the movement. It is important that just enough pressure be applied to the button to release the stem, push too hard and you will likely dislodge parts in the keyless works. This is not a major problem if you are decasing the movement for complete service, but if the intent was a minor adjustment you will find you now have to disassemble the dial side to put things right. It is best to press the button while applying a gentle pull on the stem. That way you should feel the stem release and not press any further than necessary. The stem may also require a gentle, slight turn of the crown as it is being withdrawn --- |
||
0925
中級會員 |
Wrong photo enclosed!
Sorry, the above website does not show you the details. The following is copied from Timezone Watch School: With many watches, it is advisable to place the crown in the hand-setting position before removing the stem, as this will secure the keyless works parts in the movement plate. The stem is removed by loosening the set lever screw a few turns (without removing it), or, as the photo, by depressing a sprung set-lever button . Both types will be just to the centerline of the stem on the top plate. Either action lifts the set lever post clear of the stem. The button (above left ) on our movement is held in the depressed position with a small screw driver or shapened pegwood while the stem is gently withdrawn from the movement. It is important that just enough pressure be applied to the button to release the stem, push too hard and you will likely dislodge parts in the keyless works. This is not a major problem if you are decasing the movement for complete service, but if the intent was a minor adjustment you will find you now have to disassemble the dial side to put things right. It is best to press the button while applying a gentle pull on the stem. That way you should feel the stem release and not press any further than necessary. The stem may also require a gentle, slight turn of the crown as it is being withdrawn --- |
||
watchsolo
新進會員 |
|||
0925
中級會員 |
|||
kisc
中級會員 |
============================================== 應該是這種結構....您參考一下 http://www28.discuss.com.hk/viewthread.php?tid=4526203&extra=page%3D5&page=1 |
||
kisc
中級會員 |
=================================================== 您這應該洗洗油就解決了 但洗油要用到很多工具跟材料..... 您如沒有點真功夫....我真的建議您放棄 |
||
watchsolo
新進會員 |
|||
watchsolo
新進會員 |
|||
第1頁(共2頁)
您 無法 在這個版面發表文章
您 無法 在這個版面回覆文章
您 無法 在這個版面編輯文章
您 無法 在這個版面刪除文章
您 無法 在這個版面進行投票
您 無法 在這個版面上傳附加圖檔
您 可以 在這個版面下載已上傳之附加圖檔
您 無法 在這個版面回覆文章
您 無法 在這個版面編輯文章
您 無法 在這個版面刪除文章
您 無法 在這個版面進行投票
您 無法 在這個版面上傳附加圖檔
您 可以 在這個版面下載已上傳之附加圖檔